>> Lift Outs
Economically, the Lift Out is the most cost effective type of
secondary glazing available. Its most common application is where limited access
to the primary window is required, for example a window which has been installed
with the sole object of providing light to a room.
How it works
As well as economical, the Lift Out is also the most basic form of secondary glazing.
As its name implies, it simply lifts out of a secured channel. For practical purposes,
it is advised that the sash size be considered since the weight of glass must
be of manageable proportions. Each sash is manufactured with double brush pile
seal, further increasing the thermal and sound insulation properties.
|Hardwood Sub-Frames |
21mm x 45mm
21mm x 62mm Reveal fix
30mm x 30mm Bay Adaptor
or PVCU Trims |
6mm x 21mm S.B.N.
6mm x 27mm S.B.N.
6mm x 37mm S.B.N.
6mm x 44mm S.B.N.
6mm x 55mm S.B.N.
6mm x 15mm D.B.N.
6mm x 33mm D.B.N.
6mm x 43mm D.B.N.
| || |
alloy extruded to exclusive designs from 6063T6 alloy to BS1474.
Natural anodising to AA5 - BS3987 Polyester Powder to BS6496. Stock finishes in
EP white / Van Dyke brown. High gloss finish. 60 microns. Other RAL colours upon
In accordance with BS6206 for Safety Glazing
requirements. Choices of 4mm or 6mm Clear Float, 4mm or 6mm Toughened, 6.4mm Laminated
or Laminated Acoustic Glass for Noise Reduction as well as Low E glass for Thermal
Width x Height
1500mm lift outs
An up-rated specification can be obtained upon application
to accommodate larger sizes.
draught strip to BS7386.
All gaskets extruded to BS2782,
standard colour white, black 4mm gasket also available.
Arched Heads, Gothic Heads, Stacking Units
Can be coupled with
other products in our range using our extensive range of interlocks.